ZOOZ 800 Series Z-Wave Long Range DC Signal Sensor ZEN55 | Z-Wave Hub Required

FOR ANALOG INTERCONNECTED DETECTORS ONLY: This is NOT a life safety device. Use as a home automation add-on device only. Use with hard-wired (NOT battery powered) interconnected smoke and CO detectors only.

SPECIFICATIONS: Model Number: ZEN55 Z-Wave Signal Frequency: 908.42 MHz Power: 120-240 VAC, 50/60 Hz Max Load: 10 A Z-Wave Range: Up to 300 feet line of sight (or up to a mile with Long Range enabled on hub and software) Dimensions: 1.5" tall, 1.4" wide, 0.7" deep Operating Temperature: 32-104° F (0-40° C) Installation and Use: Indoor only

SMART SPEAKER COMPATIBILITY: Smart speakers are not Z-Wave controllers, so you will need a compatible Z-Wave hub to monitor this device with your smart speaker if this functionality is supported in the integration. Compatible Z-Wave hubs include Z-Box Hub, Home Assistant (Z-Wave JS), HomeSeer, and Hubitat.

ADD Z-WAVE TO SMOKE AND CO ALARMS: Wire the DC Signal Sensor to your interconnected smoke and CO detectors and receive dedicated notifications if either of them is triggered. NOTE: This is NOT a security alarm component and the device is NOT part of a life-safety system. Check local regulations before installing. Check Z-Wave compatibility first, as this is an advanced device supported by selected hubs only.

OPTIONAL RELAY CONTROL: Utilize the 120 V relay to add smart control of lights or siren as additional functionality. This device comes with SmartStart for quick and secure network inclusion.

LONG RANGE READY: If your hub and automation software support Z-Wave Long Range, you'll get extended coverage without network lags and dropouts! And for traditional set-ups, the built-in signal repeater keeps your mesh networks stable and fast.

EASY INSTALLATION: Pigtail wires included to save you time when wiring the dimmer for a hassle-free set-up. This product is backed by a lifetime US-based support from Zooz and a 5-year warranty once registered.

HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with the Z-Box Hub (recommended for Zooz devices), Hubitat with custom driver, Home Assistant (Z-Wave JS), Ezlo, and it's compatible with SmartThings through a custom edge driver (available through the Zooz support portal).

product information: